How To Lift A Motorcycle Without A Jack

Let'south get this straight.

You want to do some repair and maintenance work on your bike without using a jack to elevator information technology off the ground.

Frankly, that's Non the safest way to do it.

Ok, I get it. Lifting it upward isn't a problem for you lot. (Those numerous hours at the gym do pay off, eh).

Simply what if you demand to hold the bike up steadily for a few hours? You'll demand stable back up!

So, what are the methods yous can use for lifting if you don't want to use a jack?

Let'southward observe out.

Can I Lift My Motorcycle by Myself?

To be honest, I always prefer using a jack. Be it a motorcycle jack, flooring jack, or auto jack, using information technology makes the task easier and safer.

Motorcycles are heavy vehicles. For example, take the Yamaha Tenere 700. That has a moisture weight of 452 pounds.

The KTM 890 Take a chance has a dry out weight of around 430 pounds.

Unless you are a veteran deadlifter with pillars instead of legs, handling heavy weights in the incorrect fashion can crusade serious injuries.

And without a jack to stabilize the bike, makeshift arrangements tin be risky. A slight error tin can result in an out-of-remainder motorcycle.

And trust me, yous don't want a heavy cruiser to topple over yous.

Also, most modern bikes don't come with a heart stand. That makes the chore fifty-fifty more hard.

Fair enough. But suppose you are stuck in a tough situation with no jack or stand with you?

Ok. You got me.

Admittedly, you can lift the wheel without a jack. In that location are simpler means of doing it by making a DIY jack.

Quite only, the motorbike needs a apartment and stable surface in the center that tin remainder information technology. Placing it on an uneven surface can crusade it to autumn.

Yes, using a motorcycle lift table is a corking idea. But you need to accept the budget and space in your garage for information technology.

In about cases, the chief reason for lifting the bike is to change tires. Y'all may need to replace the bearings and seals or alter the sprockets. Yous volition besides need to lift the bike to clean and lubricate the chain.

And to be honest, a repair shop volition charge you lot less if y'all just bring them the tires, instead of the unabridged cycle.

One affair is, I always adopt to loosen the beam nut when the bike is on the ground. That allows you to apply a lot more than strength than when the bike has been lifted up.

In case your wheel is assault a dolly, it'southward best to bring it to the ground before lifting.

How to Jack upwardly a Motorcycle Without a Jack

(Does that sound like an oxymoron? Never mind.)

Here are some of the best ways to elevator upward a wheel without a jack.

Using Stands

A great way to lift up a dirt wheel or an enduro bicycle is by using a static-style stand. These are cheap and stable stands that have safe padding on the top. The four-legged structure is elementary with no moving parts.

All yous need to exercise is lift the cycle and identify the middle of the frame on the stand. While lifting, make sure to support the weight of the bicycle on your thigh. This will reduce the stress on your lower back.

For heavier models, you lot can utilise a elevator-type stand. These stands come with a pedal continued to a linkage. By pressing on the pedal, you tin can easily lift the bicycle. It goes without saying, this method is easier on your back and arm muscles.

If you lot own a sportbike, it will probably take swing-arm spools in the rear. These tin be connected with a swing-arm spool stand for lifting the dorsum of the bike off the ground.

Make certain y'all choose the right spool based on the make and model of your bike. Since they are cheap, the spool stands are a good investment if you're a DIYer.

At present, many owners exit issues related to the front bike, front brakes, and forks to the mechanics. So, a forepart-bike stand up may not be necessary for all riders.

To elevator the front of the bike you can utilise a forklift stand up. These stands are placed under the fork legs.

Otherwise, yous can besides apply a head lift stand up. This stand up uses a pivot that fits under the steering stem. So, make sure you pick a stand of the right pin size.

Lifting a Motorcycle Without Stands

What if you demand to do some urgent repairs and do not have a stand?

Not to worry.

1 of the easiest ways to lift a motorcycle without a jack or a stand is to use a set of stacked boards. Ideally, you will need another pair of hands to assist yous with this.

While one person lifts the rear of the bike, the other can slide the boards below the engine block until the rear wheel is above the footing. To make it safer, you lot can utilize additional tie-downward straps to support the front of the bike.

If you want to warm your hands with a chip more than action, you can make a makeshift jack with some wooden blocks and a few hours of spare time. While this isn't the best arrangement in terms of finesse, it'southward a simple and applied method to get the job done.

If you lot don't accept any boards or wooden pieces around yous, it's time to get innovative.

Notation, these aren't the safest ways to elevator up a cycle just tin can piece of work during emergencies.

Remember: it's always necessary to prioritize safety while using these methods.

Brand sure you use a hard even surface like a concrete floor. If the bicycle has a middle stand use information technology for extra support. At whatsoever point during lifting, if you lot feel the bicycle getting unsteady, lower it down.

Ofttimes Asked Questions

How practice yous lift a motorbike with a regular jack?

For lifting the motorbike with a jack, you tin can use motorcycle stands. Or else, you tin think of placing wooden blocks nether the engine to elevator the rear cycle.

Can I lift a motorcycle with a machine jack?

It'south possible to lift a motorcycle by using a car jack. While the lifting mechanisms are unlike, using a car jack is similar to using a floor jack.

How can I lift my motorcycle by myself?

Lifting a motorcycle on your own should exist done safely to avert accidents. The all-time way to practise that is by using a jack. Otherwise, you tin can use a motorcycle stand or make a DIY stand by using some wooden blocks.

Suvajit bought his first motorcycle at the age of 22 and has been in dearest with the road since then. Existence a mechanical engineer, he takes a keen involvement in technical details and a hands-on approach to repairing and maintaining motorcycles. He loves writing well-nigh various topics and also almost his travels on two wheels. Ane of his future plans is to travel across the Himalayas and Tibet on a motorcycle.

Source: https://motorbikesecure.com/how-to-lift-motorcycle-without-jack/

Share this post