How To Apply Cutrine Plus Algaecide

Cutrine Plus Algicide, manufactured past Practical Bio Chemists, is a effective double chelated algaecide formula that controls algae and hydrilla h2o plants on the elevation of water in big bodies of water like lakes. This production is not to be dislocated for its granular form Cutrine Plus Granular Algicide, which is more effective against submerged algae and aquatic weeds in smaller awarding sites.

With its double chelated formula this liquid algicide prevents the precipitation of copper with carbonates and bicarbonates in water. In brusk, meaning this product moves more hands in h2o that has a high mineral content.

Cutrine Plus Algaecide provides fast results on well-nigh hard-to-impale algae or algae mixed with aquatic plants in every bit little as 1 to 2 days after application. This easy to utilise algaecide allows swimming, angling, livestock watering or irrigating plants subsequently treatment.

Tools Needed

To employ Cutrine Plus Algaecide, you volition need a backpack sprayer, handheld pump sprayer or professional skid sprayer, chemigation equipment, or driblet hoses are needed.

For general purpose applications, we recommend using a haversack or handheld pump sprayer. A boat can also be used to cover areas in the middle of the h2o body.

Do not connect an irrigation system (including greenhouse systems) used for pesticide application to a public h2o system unless the pesticide label-prescribed safety devices for public h2o systems are in place (refer to the Chemigation Systems Connected to a Public H2o Supply section of this label).

How to Use

Step 1: Identify the type of algae to determine the copper concentrate needed for maximum results. This will help make up one's mind the amount of Cutrine Plus Algicide that is required per acre per foot of water. To summate acre-feet, measure out the length, width, and average depths of the body of water inside the surface area being treated. Then follow the formula on the label to determine the acre-anxiety (Length (ft) x Width (ft) 10 Average Depth (ft) / 43,560 = Acre-feet). For typical algae applications, ane gallon of Cutrine Plus Algaecide tin care for ane.5 acre-feet of h2o. So if you accept a six acre pond, you would need 4 gallons of Cutrine Plus Algaecide.
Stride ii: Dilute the required amount of Cutrine Plus Algicide with the correct amount of water to ensure an even application is distributed. For small-scale backpack sprayer applications, use a 9:1 dilution ratio (1 gallon of Cutrine Plus Algaecide to 9 gallons of water) or a 50:1 dilution ratio when using water pump equipment or large tank sprayers.
Footstep 3: Utilise Cutrine Plus Algicide straight on the surface of the h2o, preferably on a fan nozzle spray setting for uniform coverage. Interruption up any big pieces of floating algae with a high-pressure sprayer if one is used. It is recommended to treat only 1/3 to 1/ii of the trunk of water to prevent harming fish, as removing the algae can deplete the oxygen source. Do not enter water bodies until the application process is finished.

Where to Apply

Cutrine Plus Algaecide can be practical in lakes, drink water reservoirs, ponds (Subcontract, Burn, Fish, Golf Course, Irrigation, Ornamental, Tempest water Retentiveness, Swimming), industrial ponds, wastewater, fish hatcheries and raceways, aquaculture Facilities, crop and non-crop irrigation conveyance systems (ditches, canals, and laterals).

Do not apply more than 1.0 parts per meg to areas used for drinking h2o.

When to Use

Cutrine Plus Algaecide can be used when algae or hydrilla plants are growing or every bit a preventive handling in labeled h2o sites.

Apply Cutrine Plus Algicide when there is calm and sunny conditions and when the water temperature is at to the lowest degree 60 degrees Fahrenheit. No more than than 1/2 of the water body may be treated at once. If reapplication is needed, it will need to wait until fourteen days have passed afterwards last application.

In ponds (subcontract, burn, fish, golf course, irrigation, ornamental, tempest water retentiveness, swimming), small lakes, fish hatcheries, aquaculture facilities, treatment with this product should be started when visible, actively growing algae and susceptible plants appear in spring, preferably before significant surface accumulations occur

Safety Information

Cutrine Plus Algaecide is safe around children and pets when applied according to the production label instructions. Always wearable the proper personal protective equipment (PPE) when mixing or applying this product.

Do not apply in waters containing Koi and hybrid goldfish . Not intended for apply in small volume, garden pond systems.

Waters treated with this product may exist hazardous to aquatic organisms. Handling of aquatic weeds and algae can upshot in oxygen loss from decomposition of expressionless algae and weeds. This oxygen loss tin can cause fish and invertebrate suffocation. To minimize hazard, practise non treat more than one/two of the h2o body to avoid depletion of oxygen due to decomposable vegetation.

Special Considerations

Waters treated with Cutrine Plus Algaecide may be used for swimming, fishing, further potable h2o handling, livestock watering or irrigating turf, ornamental plants or crops after treatment.

Some states may require permits for the application of this product to public waters. Check with your local authorities.

Source: https://www.solutionsstores.com/cutrine-plus-algaecide